Periodic service is necessary to maintain the healthy running life of your bike. There are different types of services available with various names. General bike service is more than enough to retain your motorcycle in perfect condition.
So, have a look at what all is covered in general bike service.
General bike service starts with a test drive. This test drive helps the mechanic thoroughly check any visible issues in your bike.
The mechanic will check for any unwanted noise or vibration and the power delivery system. Moreover, the mechanic will check the throttle response, gear shifting condition, and amount of exhaust emission.
In addition to this, he will also check the engine idling condition, condition of brakes, and handling. Apart from this, he will check the suspension response and console.
After the test drive, the mechanic will have a rough idea of issues with the bike.
So now the service starts.
The engine is the most vital component of your bike. A well-maintained engine delivers Max power and reduces fuel consumption. General bike service does not account for engine service, and the mechanic will only change the engine oil.
Moreover, engine service is not even needed much frequently. On average, a bike requires engine service somewhere between 50000 to 70000 km.
So, in general bike service, the mechanic will change the oil. In the lack of engine oil, there will be extreme wear on your engine and its part.
The mechanic will also check for leakages and the oil filter condition. If the oil filter is badly clogged, he will replace it.
In this step of general bike service, the mechanic will check the problem with the carburetor, throttle, and choke. Problem with any of these will lead to a sluggish acceleration and will also affect the fuel economy.
The mechanic will inspect the condition of the carburetor, throttle position, and proper working of the choke.
After inspecting all these, he will adjust the carburetor bowl if necessary and the throttle cable to its ideal setting. Moreover, he will lubricate the throttle play and adjust the choke.
After cleaning the carburetor, throttle, and choke, the mechanic will inspect the condition of the spark plug. A problematic spark plug will lead to reduced fuel economy, acceleration problems, and starting issues.
The mechanic will clean the spark plug and replace it. If it is damaged, he will replace it with a new one. He will also adjust the spark plug terminal.
The next step in general bike service is to check your bike’s air filter. In the case of a clogged or dirty air filter, you will experience rough idling, reduced fuel economy, and power loss.
The mechanic will check the air filter condition. If it is dirty, he will clean it and re-install it. In case it is badly clogged with dirt, the mechanic will replace it with a new one.
The next step in general bike service after air filter is that the mechanic will inspect the condition of the brakes. In the case of a disc brake, he will check the pads of brakes, and in the case of drum brakes, he will check the condition of the brake shoe.
The mechanic will clean the drum and will replace the pads or brake shoe if necessary. In case of brake bleeding, he will adjust it and will also regulate the brake play. This part of general bike service also includes a top-up of brake fluid.
After the brake, the next step of general bike service is drive chain/ belt inspection.
A bike chain without lube/ oil will build up a lot of heat and ultimately lead to its stretching.
The mechanic will check the chain condition and will tighten the chain if required. He will also provide the necessary lube for smooth movement of chain or belt.
The next step in general bike service is checking the condition of suspension. A suspension provides safety and comfort to the passenger by keeping him isolated from the road noise, bumps, and vibrations. Bike suspensions also contribute to proper handling and braking.
The mechanic will check the condition of both front and rear suspensions and adjust them if required.
The next step in general bike service after the suspension is checking for loose bolts. Bolts can loose due to the vibration of a vehicle. Each and every bolt is necessary, and hence the mechanic will check them all. He will tighten the fasteners, and along with it, he will perform lubrication of kick and gear shifting lever and lubricate the central and side stand.
This part of the general bike service accounts for electrical components. The proper functioning of the lighting system is very much necessary for the visibility of your bike in the night-time. The mechanic will check the headlight, taillight, turn indicators, horn, and other electrical components. He will also check the battery terminal and will clean it if necessary.
The last step in general bike service is that the mechanic will thoroughly clean your bike. He will first water wash it to remove visible dirt, oil, or excess grease. Then he will dry clean it so that there will be no marks of water left on the body of the bike.
Also Read: Easy to follow car maintenance tips!
These are the steps that account for a general bike service. General bike service is not really general in terms of services performed. A thorough check-up of your bike and everything is adjusted as required.
These are the steps in general bike service.